Comtech EF Data CSAT-5060 - Manual (Page 181)

CSAT-5060 C-Band Transceiver Revision 1
Ethernet-based Remote Product Management MN/CSAT5060.IOM
AA–17
AA.5.5.2.2 Admin | SNMP Page
The Administrator must use this page to manage the SNMP (Simple Network Management
Protocol) settings. At any time, click Refresh to update this page and see the most recent data.
Figure AA-5. Admin | SNMP page
SNMP
Simple Network Management – Use the drop-down list to set SNMP as Enabled or Disabled.
Read / Write / Trap Community Strings – These defaults are set at the factory. Change them as
necessary:
Field Factory Default Name
Number of
Characters
Format
Read Community String public 0 to 20 alphanumeric
Write Community String private 0 to 20 alphanumeric
Trap Community String comtech 0 to 20 alphabetic
SNMP Contact / Name / Location – Enter this contact information as necessary.
• Format: alphanumeric
• Maximum: 20 characters
Enabled Authentication Trap – Use the drop-down list to set the Authentication Trap as
Enabled or Disabled.
Trap IP 1 / Trap IP 2 – The Administrator can assign up to two SNMP Trap IP addresses in the
form 000.000.000.000.
Trap Version – Use the drop-down list to select the SNMP Trap as version SNMPv1 or SNMPv2c.