Comtech EF Data CSAT-5060 - Manual (Page 15)

CSAT-5060 C-Band Transceiver MN/CSAT5060.IOM
Preface Revision 1
xvii
Safety Compliance
EN 60950
Applicable testing is routinely performed as a condition of manufacturing on all units to ensure
compliance with safety requirements of EN60950.This equipment meets the Safety of
Information Technology Equipment specification as defined in EN60950.
Low Voltage Directive (LVD)
The following information is applicable for the European Low Voltage Directive (EN60950):
Type of power cord required for use in the European Community.
!
CAUTION: Double-pole/Neutral Fusing
ACHTUNG: Zweipolige bzw. Neutralleiter-Sicherung
International Symbols:
Symbol Definition Symbol Definition
~
Alternating Current
Protective Earth /
Safety Ground
Fuse Chassis Ground
Safety Notice
This equipment has been designed to minimize exposure of personnel to hazards.
The operators and technicians must:
• Know how to work around, with and on high voltage equipment.
• Exercise every precaution to ensure personnel safety.
• Exercise extreme care when working near high voltages.
• Be familiar with the warnings presented in this manual.
CAUTION
A Neutral Fusing - Double pole/ neutral fusing used on the prime power
supply input.
NOTE
For additional symbols, refer to Cautions and Warnings, listed
earlier in this Preface.