Comtech EF Data CSAT-5060 - Manual (Page 180)

CSAT-5060 C-Band Transceiver Revision 1
Ethernet-based Remote Product Management MN/CSAT5060.IOM
AA–16
System Account Access Information
Read Only / Read/Write / Admin Names and Passwords – These defaults are set at the factory.
Change them as necessary:
Field
Factory Default
Name / Password
Maximum
Characters
Format
Read Only Name / Password monitor / 1234
10 alphanumeric Read/Write Name / Password opcenter / 1234
Admin Name / Password comtech / comtech
SMTP Server – Set the mail server IP address from where you want to send e-mail, in the form
0.0.0.0.
SMTP Domain Name / Destination – The Administrator must assign the SMTP Domain Name
and Destination. This is necessary to use the Home | Support page e-mail feature.
The destination and domain name are typically found in an email address:
Destination Domain Name
techsupport @ comtechefdata.com
Click Submit Access to save these settings.
If you want to cancel any changes and return to using the former System Account Access
Information settings, click Reset.
Webpage Timeout
This is the maximum amount of time that the computer can remain idle before the session logs
out. After the timeout occurs, you must log in to the Web Server Interface again.
Use the drop-down list to select 8 Hours or 5 Minutes (default), and then click Change to save
the setting.