Comtech EF Data CSAT-5060 - Manual (Page 165)

AA–1
Addendum A. ETHERNET-
BASED REMOTE PRODUCT
MANAGEMENT
AA.1 Introduction
Ethernet‐based Remote Product Management of the unit is available using the J8 port.
To proceed with Ethernet‐based Remote Product Management, make sure that:
 The unit is operating with the latest version firmware files.
 The unit is connected to a user‐supplied Windows‐based PC as follows:
 The PC’s Ethernet port is connected to the unit J8 port with RJ‐45 cable.
 The PC is running a terminal emulation program (for operation of the unit
remote control Telnet interface).
 Use the remote serial query to find and record the IP Address.
See also the Remote Commands and Queries specifications tables found in Chapter 5.
SERIAL‐BASED REMOTE PRODUCT MANAGEMENT.
J8 Ethernet Port