Comtech EF Data CSAT-5060 - Manual (Page 184)

CSAT-5060 C-Band Transceiver Revision 1
Ethernet-based Remote Product Management MN/CSAT5060.IOM
AA–20
Reference Adjust
Enter a numeric value from 0 to 255 to set the reference oscillator tuning voltage. The default
voltage value is 87. Click Change to save the setting.
Serial
Remote Address – Enter a physical remote address from 0001 to 9999.
Baud Rate – Use the drop-down list to set the operating baud rate as1200,2400,4800, 9600 ,
19200 or 38400 bps.
Click Change Serial Configuration to save these settings.