Comtech EF Data CDM-700 - Manual (Page 181)

CDM-700 High Speed Satellite Modem Revision 5
Remote Control MN/CDM700.IOM
11–31
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Faults and
Status (cont) cc = Rx Faults:
00 = No Faults 0L = Buffer Slot 1 Port 2
01 = Demod 1.5 Volt Supply 0M = Buffer Slot 2 Port 1
02 = Demod FGPA Not Loaded 0N = Buffer Slot 2 Port 2
03 = Demod Unlocked 0O = Buffer Under Slot 1 Port 1
04 = Demod FEC 1 Unlocked 0P = Buffer Under Slot 1 Port 2
05 = Demod FEC 2 Unlocked 0Q = Buffer Under Slot 2 Port 1
06 = Framer Unlocked 0R = Buffer Under Slot 2 Port 2
07 = Tributaries Unlocked 0S = Buffer Over Slot 1 Port 1
08 = Demod Temperature 0T = Buffer Over Slot 1 Port 2
09 = BER Threshold 0U = Buffer Over Slot 2 Port 1
0A = AGC Level 0V = Buffer Over Slot 2 Port 2
0B = Eb/No Threshold 0W = AIS Slot 1 Port 1
0C = Tributary Packet 0X = AIS Slot 1 Port 2
0D = Serdes Demod to Framer 0Y = AIS Slot 2 Port 1
0E = Serdes FEC 1 to Demod 0Z = AIS Slot 2 Port 2
0F = Serdes FEC 2 to Demod 10 = Ext Clock Slot 1 Port 1
0G = Serdes Framer to FEC 1 11 = Ext Clock Slot 1 Port 2
0H = Serdes Framer to FEC 2 12 = Ext Clock Slot 2 Port 1
0I = Serdes Framer to Intfc 1 13 = Ext Clock Slot 2 Port 2
0J = Serdes Framer to Intfc 2 14 = Demod Synth 1 Unlocked
0K = Buffer Slot 1 Port 1 15 = Demod Synth 2 Unlocked
Redundancy RED= 1 Query or Command a=Redundancy Status
0=Redundancy not enabled.
1=Redundancy Enabled(Command Only)
1=Online 1:1
2=Offline 1:1
3=Online 1:N
4=OffLine 1:N
Example
RED=1 Enables Redundancy.
RED=0 Disables Redunddancy RED =
RED?
RED#
RED*
RED? RED=a
Gigabit
Interface
Negotiation GNG= 5Bytes Command or Query
a=Interface Slot (1 or 2)
b=0 (Auto to NO)
= 1 (Auto to YES)
c=0 (Slave)
= 1 (Master)
d=4 Speed (100Mbps)
= 8 Speed(1000 Mbps)
e=0 Duplex (Half)
= 1Duplex(Full) GNG=abcde GNG?a GNG=abcde