Comtech EF Data CDM-700 - Manual (Page 170)

CDM-700 High Speed Satellite Modem Revision 5
Remote Control MN/CDM700.IOM
11–20
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Configuration
Load CLD= 1 byte Command only.
Causes the CDM700L to retrieve a previously stored modem
configuration from Configuration Memory location defined by the
one-byte argument (0 to 9).
Example: CLD=4 (retrieve modem configuration from location 4) CLD=
CLD?
CLD*
CLD# N/A N/A
ReCenter
Buffer RCB= 2 bytes Command only.
Forces the software to recenter the receive Plesiochronous/Doppler
buffer.
s=Defines which interface slot ( 1 or 2 )
c=Defines which channel ( 1 to 2 )
Example: RCB=11 (ReCenter buffer on interface 1 channel 1) RCB=
RCB?
RCB*
RCB# N/A N/A
RTC Date DAY= 8 bytes Command or Query.
A date in the form ddmmyy, where
dd = day of the month (01 to 31),
mm = month (01 to 12)
yy = year (00 to 99)
Example: DAY=24-04-57 (April 24, 2057) DAY=
DAY?
DAY*
DAY# DAY? DAY=dd-mm-yy
RTC Time TIM= 8 bytes Command or Query.
A time in the form hhmmss, indicating the time from midnight,
where:
hh = hours (00 to 23)
mm = minutes (00 to 59)
ss = seconds (00 to 59)
Example: TIM=23:12:59 (23 hours:12 minutes:59 seconds) TIM=
TIM?
TIM*
TIM# TIM? TIM=hh:mm:ss
Number of
Unread stored
Events N/A 3 bytes Query only.
Unit returns the Number of stored Events, which remain Unread, in
the form xxx.
Note: This means unread over the remote control.
Example: NUE=126 N/A NUE? NUE=xxx