Comtech EF Data CDM-700 - Manual (Page 178)

CDM-700 High Speed Satellite Modem Revision 5
Remote Control MN/CDM700.IOM
11–28
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Equipment ID N/A 12 bytes Query only.
Unit returns information concerning the equipment identification, and the
option field, in the form abbbcdefghij;
where:
aaa=defines the model number (700 in this case)
b=Turbo H/W option: 0=None, 1=Turbo, 2=TPC/LDPC
c= Tx Symbol Rate S/W option: 0=Base (15.0 Msps), 1=Up to 22.5 Msps,
2=Up to 30.0 Msps, 3=Up to 37.5 Msps, 4=Up to 45.0 Msps,
5=Up to 64 Msps
d=Rx Symbol Rate S/W option: 0=Base (15.0 Msps), 1=Up to 22.5 Msps,
2=Up to 30.0 Msps, 3=Up to 37.5 Msps, 4=Up to 45.0 Msps,
5=Up to 64 Msps
e=Tx Higher-order modulation: 0=None, 1=8PSK, 2=16-QAM,
3=64-QAM, 4=8PSK and 16-QAM, 5=8PSK, 16-QAM and 64QAM
f=Rx Higher-order modulation: 0=None, 1=8PSK, 2=16-QAM,
3=64-QAM, 4=8PSK and 16-QAM, 5=8PSK, 16-QAM and 64QAM
g=Mod configuration: 0=Not installed, 1=70/140, 2=L-Band
h=Demod configuration: 0=Not installed, 1=70/140, 2=L-Band
i=Interface #1 status: 0=E3/T3/STS-1 Card Installed,
1-2=Reserved, 3=OC3 Card Installed, 4=Gigabit Ethernet Card
Installed, 5=HSSI Card Installed, 6-E=Reserved, F=Not Installed
j=Interface #2 status: 0=E3/T3/STS-1 Card Installed,
1-2=Reserved, 3=OC3 Card Installed, 4=Gigabit Ethernet Card
Installed, 5=HSSI Card Installed, 6-E=Reserved, F=Not Installed
Example: EID=700155111100 is a CDM-700 modem with Turbo installed,
capable of transmitting and receiving up to 64.0 Msps
using QPSK or
8PSK with both interface slots filled with E3/T3/STS-1 cards.
N/A EID? EID=aaabcdefghij
(see description of
arguments)
VLAN Mode SVM= 2 Bytes Command or Query.
a=Interface Slot (1 or 2)
b=Normal or VLAN(0=Normal, 1=VLAN) SVM=
SVM?
SVM# SVM?a SVM=ab