Comtech EF Data CDM-700 - Manual (Page 168)

CDM-700 High Speed Satellite Modem Revision 5
Remote Control MN/CDM700.IOM
11–18
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Interface
Alarm Mask IAM= 7 bytes Command or Query.
Alarm mask conditions, in form spabcdef, where:
s=slot number
p=port number
a=Tx Cable (0 = masked as Alarm,1 = masked as Fault,2 =Masked)
b=Tx AIS (0 = masked as Alarm,1 = masked as Fault,2 =Masked)
c=Rx AIS (0 = masked as Alarm,1 = masked as Fault,2 =Masked)
d=Bufferslip Alarm (0 = masked as Alarm,1 = masked as Fault,
2 =Masked)
e=External Clock Alarm (0 = masked as Alarm,1 = masked as
Fault,2 =Masked)
(Note: Command valid Only with CDI-10 Dual G.703 interface)
Example: IAM=1101011 ( alarm masks for interface slot 1, port 1 ) IAM=
IAM?
IAM*
IAM# IAM?sp IAM=spabcde
HSSI Interface
Alarm Mask HAM= 7 bytes Command or Query.
Alarm mask conditions, in form spa, where:
s=slot number
p=port number
21
a=x reserved
b=x reserved
c=x reserved
d=x reserved
e=Ext Clock Alarm (0 = masked as Alarm,1 = masked as Fault,2
=Masked) (Note: Command valid Only with Gigabit Interface)
Example: HAM= 21xxxx0 ( alarm masks for interface slot 2, port 1 ) HAM=
HAM?
HAM*
HAM# HAM?sp HAM=spxxxxe