Comtech EF Data CDM-700 - Manual (Page 179)

CDM-700 High Speed Satellite Modem Revision 5
Remote Control MN/CDM700.IOM
11–29
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
VLAN
Configuration SVC= 8Bytes Command only.
a=Interface Slot (1 or 2)“;” Deleminator
bbbb=VLAN PVID(0002 to 4094)
“:” Deleminator
c VLAN ATTRIBUTE
1=NATIVE
2=TAGGED
3=UNTAGGED
4=MANAGEMENT
Notes: Create PVID if PVID does’t exist and make room for it PVID entry
table.
1. If No Room in Table returns “ * ”
2. If Trying to add more than one Native or Management returns *
3. If Trying to change the attribute of a VLAN ID which is Native
or Management with different attribute.
SVC=
SVC#
SVC* N?A N/A
VLAN Table SVT= 1 Byte Query only.
Returns all VLAN ID’s and attributes in the table.
a=Interface Slot (1 or 2)
Example: SVT=1;0001:0002:4
The current VLAN’s in the table are PVID 1 with and attribute of NATIVE
and PVID 2 with a management attribute. N/A SVT?a SVT=abbbb…bbbb
Returns all VLAN ID’s in
table.
VLAN Delete SVD= 5Bytes Command or Query.
a=Interface Slot (1 or 2)
bbbb=VLAN PVID(0001 to 4094)
returns * if deleting Native or Management
returns * if Vlan does not exist.
SVD=
SVD?
SVD#
SVD* SVD?a; SVD=abbbb…bbbb
Returns last five VLAN
Deleted.
Set
AutoCrossover SCX= 2bytes Command or Query.
a=Interface Slot (1 or 2)
b=0(Set AutoCrossover to NO)
= 1(Set AutoCrossover to YES)
SCX=
SCX?
SCX#
SCX* SCX?a SCX=ab
Set Learning
LAN to WAN
SLM= 2bytes Command or Query.
a=Interface Slot (1 or 2)
b=0 (Set Learning to NO)
= 1 (Set Learning to YES) SLM=
SLM?
SLM#
SLM* SLM?a SLM=ab
Note: Once the Learning mode is changed, cycle power to store.