Comtech EF Data CDM-700 User Manual
Page 125

CDM-700 High Speed Satellite Modem
Revision 5
Front Panel Operation
MN/CDM700.IOM
6–71
The available FAST options are shown in the following table:
Option
Number
Option
Type
Displayed
Code
Description
01
Hardware
Mod CCA
Modulator Board Installed
02
Hardware
Demod CCA
Demodulator Board Installed
03
Hardware
TURB FEC1
Turbo FEC board installed in Slot#1
04
Hardware
Fec Slot2
Unistalled (Slot not available)
05
Hardware
Intfc #1
Installed or Uninstalled in Slot #1
06
Hardware
Intfc #2
Installed or Uninstalled in Slot #2
07
FAST
Tx QPSK
QPSK Enabled or Disabled
08
FAST
Tx 8PSK
8PSK Enabled or Disabled
09
FAST
Tx 16-QAM
16-QAM Enabled or Disabled
10
FAST
Tx 64-QAM
64-QAM Enabled or Disabled
11
FAST
Rx QPSK
QPSK Enabled or Disabled
12
FAST
Rx 8PSK
8-PSK Enabled or Disabled
13
FAST
Rx 16-QAM
16-QAM Enabled or Disabled
14
FAST
Rx 64-QAM
64-QAM Enabled or Disabled
15
FAST
Tx < 15.0 MS
Operation to 15.0 MS Enabled or Disabled
16
FAST
Tx < 22.5 MS
Operation to 22.5 MS Enabled or Disabled
17
FAST
Tx < 30.0 MS
Operation to 30.0 MS Enabled or Disabled
18
FAST
Tx < 37.5 MS
Operation to 37.5 MS Enabled or Disabled
19
FAST
Tx < 45.0 MS
Operation to 45.0 MS Enabled or Disabled
20
FAST
Tx Full Rate
Full Data Rate Enabled or Disabled
21
FAST
Rx < 15.0 MS
Operation to 15.0 MS Enabled or Disabled
22
FAST
Rx < 22.5 MS
Operation to 22.5 MS Enabled or Disabled
23
FAST
Rx < 30.0 MS
Operation to 30.0 MS Enabled or Disabled
24
FAST
Rx < 37.5 MS
Operation to 37.5 MS Enabled or Disabled
25
FAST
Rx < 45.0 MS
Operation to 45.0 MS Enabled or Disabled
26
FAST
Rx Full Rate
Full Data Rate Enabled or Disabled
IMPORTANT
DATA RATE RANGE NOTES:
1. The composite data rate range depends on the FAST option ordered with
the CDM-700. The options are arranged in ascending tiers by symbol rate and
modulation type along with the corresponding data rate range.
2. The Data Rate Range Table in the Chapter 10. Summary of Specifications
summarizes the composite data range by tiers. It also shows how the
composite data rate is constructed from the individual data ports on the data
interface modules.
3. The data rate of each individual data port depends on the particular CDI-xx
data interface installed in the CDM-700. Additional information about the data
rate range for each individual port is provided in the menus below and in the
chapter for each data interface module.