Comtech EF Data CDM-700 - Manual (Page 165)

CDM-700 High Speed Satellite Modem Revision 5
Remote Control MN/CDM700.IOM
11–15
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Rx Interface
Enable RIE= 3 bytes Command or Query.
Interface Channel Enable/Disable, where:
s=Defines which interface slot ( 1 or 2 )
c=Defines which channel ( 1 to 2 )
x=Rx Interface Status, where:
0=Disabled
1=Enabled
Example: RIE = 111 (Enables receive on interface slot 1, channel 1) RIE=
RIE?
RIE*
RIE# RIE?sc RIE=scx
(see description of
arguments)
Rx Clock
Source RCK= 3 bytes Command or Query.
Rx Clock Source (For Data Rate Accuracy), where:
s=Defines which interface slot ( 1 or 2 )
c=Defines which channel ( 1 to 2 )
x=Rx Clock Source, where:
0=Rx Satellite
1=Tx-Terrestrial
2=External Reference Clock (CDI-10 Only)
3=Internal (CDI-50 OC-3 and CDI-60 HSSI Only)
Example: RCK=111 (selects Tx-Terrestrial)
RCK=
RCK?
RCK*
RCK# RCK?sc RCK=scx
(see description of
arguments)
Interface
Reference
Clock EFI= 2 bytes Command or Query.
s=Defines which interface slot (1 or 2)
x=EXT CLK (Data Rate Accuracy), where:
0 = 1 MHz
1 = 2 MHz
2 = 2.048 MHz
3 = 5 MHz
4 = 10 MHz
5 = 20 MHz
6 = 34.368 MHz
7 = 44.736 MHz
8 = 51.840 MHz
(Note: Command valid Only with CDI-10 Dual G.703 interface)
Example: EFI=14 (Selects 10MHz on slot 1)
EFI=
EFI?
EFI*
EFI# EFI?s EFI=sx
(see description of
arguments)
Eb/No Alarm
Point EBA= 4 bytes Command or Query.
Eb/No alarm point in dB, with a range between 0.1 and 16 dB.
Resolution=0.1 dB
Example: EBA=12.3 EBA=
EBA?
EBA*
EBA# EBA? EBA=xx.x
(see description of
arguments)