Comtech EF Data CDM-700 - Manual (Page 107)

CDM-700 High Speed Satellite Modem Revision 5
Front Panel Operation MN/CDM700.IOM
6–53
The display indicates if there are any Transmit Traffic Faults. If not, None is displayed. Press
ENTER
to return to the previous menu.
If Live Alarms: Æ Receive is selected:
Rx Traffic: Rx Synth
Demod Unlocked (E)
The display indicates if there are any Receive Traffic Faults. If not, None is displayed. Press
ENTER
to return to the previous menu.
If Live Alarms: Æ Unit is selected:
Unit Fault: FPGA Temp Framer
Card (E)
The display indicates if there are any Unit Faults. If not, None is displayed. Press
ENTER
to
return to the previous menu.
LISTING OF PRIORITIZED FAULTS
UNIT FAULTS
1) FPGA Load Framer Card
2) +1.5V PSU Framer Card
3) +1.5V PSU Interface Card #1
4) +1.5V PSU Interface Card #2
5) +3.3V PSU Framer Card
6) +5V PSU Framer Card
7) +12V PSU Framer Card
8) -12V PSU Framer Card
9) +18V PSU Framer Card
10) FLASH Checksum Error
11) FPGA Load FEC Card #1
12) FPGA Load FEC Card #2
13) FPGA Load Interface Card #1
14) FPGA Load Interface Card #2
15) PLL Clock Framer - 192 MHz
16) PLL Clock Framer - Ext Ref
17) FPGA Temp Framer Card
18) Modem Ambient Temp
19) Modem Cooling Fans
20) Intfc1 has been removed
21) Intfc2 has been removed
22) 1:1 Switch not present