Comtech EF Data CDM-700 - Manual (Page 121)

CDM-700 High Speed Satellite Modem Revision 5
Front Panel Operation MN/CDM700.IOM
6–67
UTIL:
Æ Display
Edit Display Brightness:
100% ( E)
Brightness levels of 25%, 50%, 75% or 100% are selectable. Edit the display brightness using
the ST arrow keys. Once the desired brightness has been set, press
ENTER
.
UTIL:
Æ Firmware
IMPORTANT
THESE MENUS ARE FOR DIAGNOSTIC PURPOSES ONLY. DO NOT
CHANGE AN IMAGE UNLESS INSTRUCTED TO DO SO BY COMTECH
EF DATA CUSTOMER SERVICE TECHNICIANS.
The submenus available under UTIL: Firmware permit viewing information about the CDM-700
internal firmware. The modem stores two complete firmware images, and the user can select which
image will be loaded the next time the unit reboots.
Firmware Images:
Info Select ( E)
Select either Info or Select using the W X arrow keys, then press
ENTER
.
If Firmware Images: Info is selected:
Firmware Info: Bootrom
Image#1 Image#2
The user can view information on the Bootrom and the two images. Select Bootrom, Image#1, or
Image#2 using the W X arrow keys, then press
ENTER
.
If Firmware Info: Æ Bootrom is selected:
Bootrom: XX/XX/XX
CDM7XX_Boot X.X.X
The information on the installed Bootrom firmware is provided; on the top display line, the
release date is provided in DAY/MONTH/YEAR format. The bottom line provides the Firmware
release number and its installed version number.
Press ENTER or
CLEAR
to return back to the previous menu.