Comtech EF Data CDM-700 - Manual (Page 180)

CDM-700 High Speed Satellite Modem Revision 5
Remote Control MN/CDM700.IOM
11–30
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Faults and
Status N/A 8 bytes Query only.
Unit returns the current fault and status codes for the Unit (hardware), Modulator, Demodulator, and
Interfaces, where:
a = Unit Faults:
0 = No Faults C = FPGA Load (FEC 2)
1 = Framer FPGA Not Loaded D = FPGA Load (Interface 1)
2 = 1.5 Volt Supply E = FPGA Load (Interface 2)
3 = 1.5 Volt Supply (Intfc 1) F = 192MHz PLL Fault
4 = 1.5 Volt Supply (Intfc 2) G = Ext Reference PLL Fault
5 = 3.3 Volt Supply H = Framer FPGA Temperature
6 = 5.0 Volt Supply I = Framer Temperature
7 = 12.0 Volt Supply J = Cooling Fans
8 = -12.0 Volt Supply K = Interface 1
9 = 18.0 Volt Supply L = Interface 2
A = Flash Load M = 1:1 Redundancy Switch
B = FPGA Load (FEC 1)
bb = Tx Faults:
00 = No Faults 0J = PECL Slot 1 FIFO
01 = Modulator 1.5 Volt Supply 0K = PECL Slot 2 FIFO
02 = Modulator FPGA Not Loaded 0L = Reserved
03 = Symbol Rate PLL 0M = Rserved
04 = Synthesizer Lock 0N = Reserved
05 = Digital Clock Mgmt Lock 0O = Reserved
06 = I & Q Activity 0P = Reserved
07 = Modulator Temperature 0Q = Reserved
08 = Modulator Filters 0R = Reserved
09 = Cable Slot 1 Port 1 0S = Reserved
0A = Cable Slot 1 Port 2 0T = Reserved
0B = Cable Slot 2 Port 1 0U = Reserved.
0C = Cable Slot 2 Port 2 0V = Serdes Slot 1 to Framer
0D = AIS Slot 1 Port 1 0W = Serdes Slot 2 to Framer
0E = AIS Slot 1 Port 2 0X = Serdes Modulator to FEC 1
0F = AIS Slot 2 Port 1 0Y = Serdes Modulator to FEC 2
0G = AIS Slot 2 Port 2 0Z = Serdes FEC 1 to Framer
0H = ASI Slot 1 Clock 10 = Serdes FEC 2 to Framer
0I = ASI Slot 2 Clock 11 = Serdes Framer to Modulator
13= GBEI CABLE SLOT 1
14 = GBEI CABLE SLOT 22
N/A FLT? FLT=aabbccde (see
description for details of
arguments
d=0
NO Change in fault status
since last poll.
D=1
Change in fault status
since last poll.
E=0
NO Change in
configuration since last
poll.
E=1
Change in configuration
since last poll.
(see description of
arguments)