Comtech EF Data CDM-700 - Manual (Page 176)

CDM-700 High Speed Satellite Modem Revision 5
Remote Control MN/CDM700.IOM
11–26
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
OC3 Global
Configuration OGC= 9 bytes Command or Query.
a=Interface Slot 1 or 2
b=Interface Mode (0 = Optical, 1 = Coax)
c=Tx Enable (0=Disabled, 1=Enabled) *TIE
d=Rx Enable (0=Disabled, 1=Enabled) *RIE
e=Rx Clock Source *RCK
f=Receive Buffer Size (in milliseconds.) *RBS OGC=
OGC?
OGC#
OGC* OGC?a OGC=abcdeff.f
HSSI Global
Configuration HGC= 33 bytes Command or Query.
a=Interface Slot (1 or 2)
b=Tx Enable (0=Disabled, 1=Enabled) *TIE
c=Tx Clock Invert (0=Non-Inverted, 1=Inverted)
d=Tx Data Invert (0=Non-Inverted, 1=Inverted) *TDI
e=Tx Clock Source (Read-only) *TCK
f=Tx Datarate (in megabits per second) *ITR
g=Rx Enable (0=Disabled, 1=Enabled) *RIE
h=Rx Clock Invert (0=Non-Inverted, 1=Inverted)
i=Rx Data Invert (0=Non-Inverted, 1=Inverted) *RDI
j=Rx Clock Source *RCK
k=Rx Datarate (in megabits per second) *IRR
l=Receive Buffer Size (in milliseconds) *RBS HGC=
HGC?
HGC#
HGC* HGC?a HGC=abcdefff.ffffffghijk
kk.kkkkkkll.l
Interface Type
And
Configuartion
in Slot 1 IFA? N/A Command or Query.
IFA=* Turn OFF All ports on Slot 1 IFA= IFA? BGC =DGC port 1,DGC
port 2 for Slot1
HGC=HGC for Slot 1
GGC=GGC for Slot 1
OGC=OGC for Slot1
IFA=*(No Card Installed)
Interface Type
And
Configuartion
in Slot 2 IFB? NA Command or Query.
IFB=* Turn OFF All ports on Slot 2 IFB= IFB? BGC =DGC port 1,DGC
port 2 for Slot2
HGC=HGC for Slot 2
GGC=GGC for Slot 2
OGC=OGC for Slot2
IFB=*(No Card Installed)