BECKHOFF AX5000 S-IDN Parameters - Manual (Page 173)

S­IDNs
S­0­0405 Probe 1 enable
This parameter is used to activate probe unit 1 of the drive. This parameter can be linked with a real­time
control bit (S­0­0301), so that activation is possible via the MasterControlWord (S­0­0134).
Attributes
Name Value
Format binary
Data length 16
Decimal point 0
Min value ­
Max value ­
Default value ­
Unit ­
Changeable in EtherCAT state PreOp, SafeOp, Op
Cyclic transfer MDT
Device parameter No
Related to interface revision No
The drive checks this parameter as long as S­0­0170 is enabled. To start a new measuring probe cycle, the
value of this IDN must be changed from 0 to 1.
Bit pattern:
Bit Meaning
0 Probe 1
Probe 1
0 = not enabled
1 = enabled
1 – 15 Reserved
Note
IDNs involved
S­0130, S‐0131 [ } 105], S‐0‐0170 [ } 124], S‐0‐0301 [ } 154], S­0­0303
Note
Additional functional description
AX5000 / Probe Unit
Also see about this
2 S­0­0130 Probe value 1 positive edge [ } 104]
2 S­0­0303 Allocation of real­time control bit 2 [ } 155]
AX5000 ­ IDN­Descriptions 173 Version 3.1