BECKHOFF AX5000 S-IDN Parameters - Manual (Page 104)

S­IDNs
S­0­0130 Probe value 1 positive edge
The parameter contains the value which is stored in the probe unit in the event of a positive edge at its signal
input.
Attributes
Name Value
Format dec
Data length 32
Decimal point 0
Min value ­
Max value ­
Default value 0.0
Unit ­
Changeable in EtherCAT state No
Cyclic transfer AT
Device parameter No
Related to interface revision
As "source" for this value, the actual position value of feedback system 1 (S­0­0051) can be selected, for
example. In this case, the actual position of feedback 1 at the time of the positive edge of the configured
signal is stored here.
Note
IDNs involved
S‐0‐0051 [ } 52], S‐0‐0053 [ } 53], S‐0‐0076 [ } 55], S‐0‐0079 [ } 57], P­0­0250
Note
Additional functional description
AX5000 / Probe unit
AX5000 ­ IDN­Descriptions 104 Version 3.1