BECKHOFF AX5000 S-IDN Parameters - Manual (Page 152)

S­IDNs
S­0­0295 Drive enable delay time
The parameter contains the delay “Drive enable delay time”. This delay time starts as soon as bit 14 is set by
S­0­0134. It delays the power supply of the motor by the set time. Within this time it is then possible to switch
a contactor that may be present in the motor cable.
Attributes
Name Value
Format udec
Data length 16
Decimal point 0
Min value 0
Max value 10 000
Default value ­
Unit ms
Changeable in EtherCAT state PreOp
Cyclic transfer No
Device parameter No
Related to interface revision No
Note
Nested structure
Note the nesting depth and the structure information at the start of the descriptions.
Note
IDNs involved
S‐0‐0134 [ } 106]
AX5000 ­ IDN­Descriptions 152 Version 3.1