BECKHOFF AX5000 S-IDN Parameters - Manual (Page 143)

S­IDNs
S­0­0254 Actual parameter set
The parameter contains the number of the current data set.
Attributes
Name Value
Format udec
Data length 16
Decimal point 0
Min value ­
Max value ­
Default value ­
Unit ­
Changeable in EtherCAT state No
Cyclic transfer No
Device parameter No
Related to interface revision No
For a parameter set switchover the data set must be correct and specified in S­0­0217. It is not possible to
switch the drive to EtherCAT state OP if the data set 0 is not valid.
Bit patterns
Bit Meaning
0 ­2 Structure of the actual parameter set
Structure of the actual parameter set
0 = data set 0 activated
1 = data set 1 activated
2 = data set 2 activated
3 = data set 3 activated
4 = data set 4 activated
5 = data set 5 activated
6 = data set 6 activated
7 = data set 7 activated
3 ­
15
Reserved
Note
IDNs involved
S‐0‐0217 [ } 141]
AX5000 ­ IDN­Descriptions 143 Version 3.1