Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (January 2015) - Manual (Page 64)

Controls, Indicators, and Connectors
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54H) 64
3.1.1
LEDs and Interfaces
The blade's faceplate provides the following interfaces and control elements:
 Two USB 2.0 ports
 Serial console port to connect to either payload or IPMC serial I/F
 Leds
 Two Ethernet ports
 Reset button
The LEDs on the faceplate are described in the following table:
Table 3-1 Faceplate LEDs
Indicator Color Description
Out of Service LED1 Red or
Amber Out of Service
Red/ optional Amber (controlled by IPMC): This LED is controlled by higher
layer software such as middleware or applications.
Red: "ON" after power up and lamp test finished
Turned "OFF" by OS startup script or application.
In Service LED2 Green or
Red In Service
Red/green (controlled by IPMC). If both red and green are lit, it may look
amber): This LED is controlled by higher layer software such as
middleware or applications.
"OFF" after power up and lamp test finished
Turned green "ON" by OS startup script or application.