1 set feature configuration command, 2 get feature configuration command, Table 8-21 – Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (January 2015) User Manual
Page 201: Set feature configuration command, Table 8-22, Get feature configuration command, Supported ipmi commands
Supported IPMI Commands
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54H)
201
8.3.1.1
Set Feature Configuration Command
This command can be used to set the IPMI feature.
8.3.1.2
Get Feature Configuration Command
This command can be used to retrieve the IPMI feature set being configured.
Table 8-21 Set Feature Configuration Command
Byte
Data Field
Request Data
1:3
Artesyn IANA Number (0065CDh). LSB first.
4
Feature Selector.
For details, please see
Table "Feature Selector Assignments"
5
Feature Configuration
00h = disabled (Feature Selector = E2h)
01h = enabled (Feature Selector = E2h)-Default
02h - FFh = reserved
6
Persistency / Duration
00h = volatile. Actual duration depends on
implementation.
01h - FFh = reserved
Response Data
1
Completion Code. Generic plus the following command-
specific completion codes:
80h = feature selector not supported.
81h = feature configuration not supported
82h = configuration persistency / duration not supported
2:4
Artesyn IANA Number (0065CDh). LSB first.
Table 8-22 Get Feature Configuration Command
Byte
Data Field
Request Data
1:3
Artesyn IANA Number (0065CDh). LSB first.
4
Feature Selector, for details see