Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (January 2015) - Manual (Page 40)

Introduction
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54H) 40
 Cave Creek Mezzanine card for compression/decompression or security (optional)
 Hardware RAID 0 and 1 is supported for locally and externally connected disk drives
 Next generation communications platform from Intel, codename Crystal Forest with on-
board Intel C604 chipset Platform Controller Hub (PCH)
 Base interface: Dual 10/100/1000Base-T Ethernet
 Fabric Interface: Dual 1G/10Gbps Ethernet interfaces, support PICMG3.1 option 1 and 9
 Serial over LAN via AdvancedTCA base interface
 Firmware (BIOS, IPMC,FPGA) upgradeable
 On-board IPMI management controller (IPMC) implements IPMI version 1.5
 On-board Glue Logic FPGA for IPMC extension and on-board Control register
 BIOS Chip: Up to 8MB on-board Boot and 8 MB Recovery Boot Flash (SPI)
1.2 Standard Compliances
The product is designed to meet the following standards.
Table 1-1 Standard Compliances
Standard Description
SN29500/8 Reliability requirements
MIL-HDBK-217F
SR-332
TR-NWT-000357
IEC 60068-2-1/2/3/13/14 Climatic environmental requirements. The product
can only be used in a restricted temperature range.
IEC 60068-2-27/32/35 Mechanical environmental requirements
IEC 60950-1, EN 60950-1, UL/CSA
60950-1 Safety requirements
UL 94V-0/1, Oxygen index for PCBs
below 28% Flammability