Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (January 2015) - Manual (Page 39)

Chapter 1
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54H) 39
Introduction
1.1 Features
The ATCA-7370 is a high-performance ATCA compliant single board computer designed for
demanding storage and processing applications.
A single processor variant of the ATCA-7370 is also available. It is called ATCA-7370-S.
The main features of the ATCA-7370 board are as follows:
 Designed for NEBS and ETSI compliance
 Dual socket Intel Xeon E5-2648L eight core processor
 Memory: Total of eight DDR3 DIMM slots, supports up to 128 GB memory with speed rate
up to DDR3-1600 and four slots in case of single processor variant.
 Single slot ATCA form factor (280mm x 322mm)
 Redundant connections to the back plane's Base Interfaces (PICMG3.0) and Fabric
Interfaces (PICMG 3.1 Option1,9)
 External Interfaces
Front Panel
– One RJ45 GE Ethernet Port, the other RJ45 GE port (the lower one) is reserved
– Two USB2.0 interfaces
– One serial console
– Reset button
RTM Interface
– Total 36 PCI-E Lanes on three Zone3 connectors
– Intelligent Platform Management Interface (IPMI) bus
– Two SAS interfaces
– One USB interface
 Multiple software packages including operating systems
 Storage:
– Hot-swappable hard disks
– On-board solid state disk at SATA, up to 256GB(optional)