Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (January 2015) - Manual (Page 184)

Supported IPMI Commands
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54H) 184
8.1.3 BMC Watchdog Commands
The watchdog commands are supported by blades providing a system interface and a
watchdog type 2 sensor.
The options of pre-timeout and power-cycle are not supported.
Get Channel Info 0x06/0x07 0x42
Set User Access 0x06/0x07 0x43
Get User Access 0x06/0x07 0x44
Set User Name 0x06/0x07 0x45
Get User Name 0x06/0x07 0x46
Set User Password 0x06/0x07 0x47
Set User Payload Access 0x06/0x07 0x4C
Get User Payload Access 0x06/0x07 0x4D
Master Write-Read 0x06/0x07 0x52
Set Channel Security
Keys 0x06/0x07 0x56
Table 8-2 Supported System Interface Commands (continued)
Command
NetFn
(Request/Response)
CMD
Table 8-3 Supported Watchdog Commands
Command NetFn (Request/Response) CMD
Reset Watchdog Timer 0x06/0x07 0x22
Set Watchdog Timer 0x06/0x07 0x24
Get Watchdog Timer 0x06/0x07 0x25