Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (January 2015) - Manual (Page 158)

Maps and Registers
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54H) 158
6.3.12.2 Reset Function Register
The reset function register selects the reset function for a certain reset source among warm-
reset and cold-reset. If a cold-reset is on going, a warm-reset request will be ignored.
4 Enable RTM push button reset payload
1: enabled
0: disabled 0 LPC: r/w
IPMC: r
5 Enable FPGA Watchdog reset payload
1: enabled
0: disabled 0 LPC: r/w
IPMC: r
6 Enable BIOS reset payload
1: enabled
0: disabled 0 LPC: r/w
IPMC: r
7 Enable OS reset payload
1: enabled
0: disabled 0 LPC: r/w
IPMC: r
Table 6-52 Reset Mask Register (continued)
Address Offset: 0x0F
Bit Description Default Access
Table 6-53 Reset Function Register
Address Offset: 0x10
Bit Description Default Access
0 Reserved 0 r
1 Reserved 0 r
2 Select the function of front board push
button payload request
1: Warm-reset
0: Cold-reset 1 LPC: r/w
IPMC: r