Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (January 2015) - Manual (Page 198)

Supported IPMI Commands
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54H) 198
8.2 PICMG 3.0 Commands
The Artesyn Embedded Technologies IPMC is a fully compliant AdvancedTCA Intelligent
Platform Management Controller. It supports all required and mandatory AdvancedTCA
commands as defined in the PICMG 3.0 R3.0 specification and AMC.0 R2.0 specification.
Table 8-19 Supported PICMG 3.0 Commands
Command
NetFn
(Request/Response)
CMD
Get PICMG Properties 0x2C/0x2D 0x00
Get Address Info 0x2C/0x2D 0x01
FRU Control 0x2C/0x2D 0x04
Get FRU LED Properties 0x2C/0x2D 0x05
Get FRU LED Color Capabilities 0x2C/0x2D 0x06
Set FRU LED State 0x2C/0x2D 0x07
Get FRU LED State 0x2C/0x2D 0x08
Set IPMB State 0x2C/0x2D 0x09
Set FRU Activation Policy 0x2C/0x2D 0x0A
Get FRU Activation Policy 0x2C/0x2D 0x0B
Set FRU Activation 0x2C/0x2D 0x0C
Get Device Locater Record ID 0x2C/0x2D 0x0D
Set Port State 0x2C/0x2D 0x0E
Get Port State 0x2C/0x2D 0x0F
Compute Power Properties 0x2C/0x2D 0x10
Set Power Level 0x2C/0x2D 0x11
Get Power Level 0x2C/0x2D 0x12
Get IPMB Link Info 0x2C/0x2D 0x18
Set AMC Port State 0x2C/0x2D 0x19
Get AMC Port State 0x2C/0x2D 0x1A
Get FRU Control Capabilities 0x2C/0x2D 0x1E
Get target upgrade capabilities 0x2C/0x2D 0x2E