beautypg.com

Supported ipmi commands, 1 standard ipmi commands, 1 global ipmi commands – Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (January 2015) User Manual

Page 183: 2 system interface commands, Table 8-1, Supported global ipmi commands, Table 8-2, Supported system interface commands, Chapter 8

background image

Chapter 8

ATCA-7370/ATCA-7370-S Installation and Use (6806800P54H)

183

Supported IPMI Commands

8.1

Standard IPMI Commands

The IPMC is fully compliant to the Intelligent Platform Management Interface v1.5. This section
provides information about the supported IPMI commands.

8.1.1

Global IPMI Commands

The IPMC supports the following global IPMI commands.

8.1.2

System Interface Commands

The IPMC supports the following IPMI commands to support the system messaging interfaces.

Table 8-1 Supported Global IPMI Commands

Command

NetFn (Request/Response) CMD

Get Device ID

0x06/0x07

0x01

Cold Reset

0x06/0x07

0x02

Warm Reset

0x06/0x07

0x03

Get Self Test Results

0x06/0x07

0x04

Get Device GUID

0x06/0x07

0x08

Table 8-2 Supported System Interface Commands

Command

NetFn
(Request/Response)

CMD

Set BMC Global Enables

0x06/0x07

0x2E

Get BMC Global Enables 0x06/0x07

0x2F

Clear Message Flags

0x06/0x07

0x30

Get Message Flags

0x06/0x07

0x31

Get Message

0x06/0x07

0x33

Send Message

0x06/0x07

0x34

Set Channel Access

0x06/0x07

0x40

Get Channel Access

0x06/0x07

0x41