beautypg.com

AMETEK Lx Series II User Manual

Page 41

background image

User Manual

Lx / Ls Series II

37

-LKS

Clock and Lock Auxiliary. See -LKM for details. (See Notes, see section
3.9.)

-LNS

Line Sync (see Notes)

-MB

Multi-box option. Provides additional controller(s) on 9000Ls/2,
12000Ls/2, 13500Ls/3 or 18000Ls/3 configurations allowing system to
be separated into individual functional units.

-RMS

Set of 2 Rack mount slides. (Left and Right) Recommended to mount Lx
Chassis in 19-inch instrument cabinet.

-RPV

Remote programming voltage. DC voltage input 0 to +10 VDC for 0 to
full-scale output voltage programming.

Notes:

External Trigger input is standard.
Line sync and External sync are mutually exclusive.
External Trigger input and External sync are mutually exclusive.
Units with -LKS (auxiliary) cannot have Line Sync or External Sync.

2.7.1 -HV Option Ls Series - Supplemental Specifications

Specifications for Ls units with -HV voltage range option installed are same as standard Ls unit
except where noted below.

Voltage:

Ranges (L-N):

Low range

0 - 156 Vrms

High range

0 - 312 Vrms

Maximum Current at Full Power

Note: Current, maximum amps per phase available at on low voltage range. 3000Ls and 4500Ls

operate in constant power mode up to currents shown at reduced voltage. See Figure 2-1.
For 9000Ls/2 and 12000Ls/2, currents are 2 x 4500Ls and 6000Ls.
For 13500Ls/3 and 18000Ls/3, currents are 3 x 4500Ls and 6000Ls

Model

3000Ls-HV

4500Ls-HV

6000Ls-HV

Single Phase Mode:
Max. RMS, low Vrange

38.4 A

38.4 A

38.4 A

Three Phase Mode:
Max. RMS, low Vrange
per phase

12.8 A

12.8 A

12.8 A

Note:

Current derates linearly from 50% of voltage range to 20% of specified current at 10% of
voltage range.
Current in High voltage range is reduced by a factor of 2.

Note:

For 9000Ls/2-HV and 12000Ls/2-HV, currents are 2 x 4500Ls-HV and 6000Ls-HV.
For 13500Ls/3-HV and 18000Ls/3-HV, currents are 3 x 4500Ls-HV and 6000Ls-HV

Maximum Current at Full Scale Voltage

Model

3000Ls-HV

4500Ls-HV

6000Ls-HV

Single Phase Mode:
Max. RMS, low Vrange

19.2 A

28.8 A

38.4 A

Three Phase Mode:
Max. RMS, low Vrange
per phase

6.4 A

9.6 A

12.8 A

This manual is related to the following products: