Option –amd: airbus amd24 test (software) – AMETEK Lx Series II User Manual
Page 216
User Manual
Lx / Ls Series II
212
14. Option
–AMD: Airbus AMD24 Test (Software)
Use of this option requires the following:
Lx or Ls Series AC power source with firmware revision 1.4 or higher.
-AMD option. Options installed are lis
ted on unit‟s serial tag.
Windows XP/2000 PC with RS232C, USB, LAN or National Instruments GPIB controller
interface. AMETEK recommends the use of the GPIB interface for best performance.
LxGui Windows software revision 1.17 or higher. Provided on CI P/N CIC496 CD ROM
or available for download from the AMETEK Programmable Power website.
Additional equipment will be required in order to meet all AMD directive test
requirements.
Refer to the Avionics Software Test user manual (CI P/N 4994-971) for operating instructions for
all GUI based test options. This manual is distributed in PFD format on the same CD as this user
manual. (CI P/N CIC496).