AMETEK Lx Series II User Manual
Page 215
User Manual
Lx / Ls Series II
211
13. Option
–A350: Airbus A350, ABD0100.1.8 Test (Software)
Use of this option requires the following:
Lx or Ls Series AC power source with firmware revision 1.40 or higher.
-A350 option
. Options installed are listed on unit‟s serial tag.
Windows XP/2000 PC with RS232C or National Instruments GPIB controller interface.
AMETEK recommends the use of the GPIB interface for best performance.
LxGui Windows software revision 1.18.0.0 or higher. Provided on CI P/N CIC496 CD
ROM or available for download from the AMETEK Programmable Power website.
Additional equipment will be required in order to meet all ABD directive test
requirements.
Some hardware options may be required to perform certain tests.
Refer to the Avionics Software Test user manual (CI P/N 4994-971) for operating instructions for
all GUI based test options. This manual is distributed in PFD format on the same CD as this user
manual. (CI P/N CIC496).