AMETEK Lx Series II - Manual (Page 40)

User Manual Lx / Ls Series II
36
2.7 Available Options – Ls Series
Output Options
-AX Auxiliary outputs, 5 VAC and 26 VAC, 400 Hz. (Output D and E)
- HV 156 / 312 V range output
- EHV 200 / 400 V range output
-HF High frequency option. Increases output frequency to 5000 Hz (single
chassis configurations) or 2000 Hz (multi-chassis models).
-LF Low frequency option. Limits maximum output frequency to 500 Hz.
-MODE Adds single phase and three phase mode switching capability to –3 LS
models. Not available on –1 models.
Firmware Options
- 160 RTCA/DO-160D test firmware.
Includes RCTA-DO160D, section 16, Change #2 and EURO/CAE-14D
AC tests only.
- 704 Mil Std 704 test firmware – MIL704
Includes AC tests for Revisions D and E
- 704F Mil Std 704 test firmware – MS704
Includes AC tests for Revisions A through F
-ABD Airbus ABD0100.1.8 Tests. – ABD
Includes tables A, B and C.
This option can only be used with the provided LxGui Windows software.
-AMD Airbus AMD234 Tests. – AMD
This option can only be used with the provided LxGui Windows software.
-B787 Boeing 787B3-0147 Tests. – B787
This option can only be used with the provided LxGui Windows software.
Misc. Options
-ADV Advanced features package. Adds arbitrary waveform generation and
harmonic analysis measurements. For specifications, see Lx Series.
-EXS External Sync (see Notes)
-GPIB GPIB interface. Also adds APE command language support for
backward compatibility with L Series. See Lx/Ls Programming Manual
P/N 7004-981 for detail on APE command language.
As of firmware revision 1.61, the ABLE (Atlas Based Language
Extension) command syntax is supported as well with the
–GPIB option.
For details on using SCPI, APE or ABLE programming language, refer to
the Lx/Ls Series Programming Manual (P/N 7004-981).
-KP Replaces standard Ls dual shuttle knob keyboard/display with Lx type
numeric keypad style keyboard/display.
-L22 Locking Knobs. Shaft lock screws replace knobs to prevent turning of
Voltage and Frequency shuttles.
-LAN Ethernet LAN interface connection. RJ45 connector.
Note: When installed, RS232C interface is disabled.
-LKM Clock and Lock Master. Enables synchronizing outputs of two Lx AC
sources, one acts as master.
This mode supports a frequency range of 45 to 819 Hz on standard
Lx/Ls models. See section 3.9.