AMETEK Lx Series II User Manual

Page 22

Text mode
Original mode

User Manual

Lx / Ls Series II

Output Parameter

Specification

Phase (3 phase mode)

Range:

Phase B/C relative to phase A

0.0 to 360.0°

Resolution:

0.1° < 819.1 Hz
0.5° > 819.1 Hz

Accuracy:

< 1°

[45 Hz - 1000 Hz]

< 1° + 1°/kHz

[> 1000 Hz]

Note: Specification valid under balanced load conditions.

Note: All output specifications apply below the Current / Voltage rating line shown in the

V/I rating charts of section 2.1.2.1 for Lx Series and section 2.1.2.2 for Ls Series.
Data is shown for 3-phase mode, low voltage range. For 1-phase mode, multiply
current by 3. For high voltage range, divide current by 2 and multiply voltage by 2.

2.1.2.1 Voltage versus Current Rating Charts - Lx Series

Current

(RMS)

Voltage (RMS)

75 78

100%

60%

80%

40%

20%

150

150 V Range

Full

Power

12.8 A

Figure 2-1: 3000Lx Voltage / Current Rating Chart for 150V AC Range in 3 phase mode.

This manual is related to the following products:

Ls Series II