AMETEK Lx Series II - Manual (Page 217)

User Manual Lx / Ls Series II
213
15. Option
–B787: Boeing 787B3-0147 Test (Software)
Use of this option requires the following:
Lx or Ls Series AC power source with firmware revision 1.4 or higher.
-B787 option . Options installed are listed on unit‟s serial tag.
Windows XP/2000 PC with RS232C or National Instruments GPIB controller interface.
AMETEK recommends the use of the GPIB interface for best performance.
LxGui Windows software revision 1.15 or higher. Provided on CI P/N CIC496 CD ROM
or available for download from AMETEK Programmable Power website.
Additional equipment will be required in order to meet all B787 directive test
requirements.
Refer to the Avionics Software user manual (CI P/N 4994-971) for operating instructions for all
GUI based test options. This manual is distributed in PFD format on the same CD as this user
manual. (CI P/N CIC496).