Adept s650HS Quattro - Manual (Page 85)

Adept Quattro User's Guide, Rev F
Page 85 of 196
Chapter 5: System Operation
5.1 Robot Status Display Panel
The robot Status Display panel is located on the robot base. The Status Display and LED
blinking pattern indicate the status of the robot.
Figure 5-1. Robot Status Display Panels
NOTE: The status codes and LED status indications are the same for both the
Quattro H and Quattro HS robots.
Table 5-1. Robot Status LED Definition
LED Status
2-Digit Status
Panel Display
Description
Off No display 24 VDC not present
Off OK High Power Disabled
Amber, Solid ON High Power Enabled
Amber, Solid Fault Code(s) Fault, see Status Display 1
Amber, Slow Blink OK or Fault Code(s) Selected Configuration Node
1
Amber, Fast Blink Fault Code(s) Fault, see Status Display
1
1
See Status Panel Fault Codes on page 86.