Adept s650HS Quattro - Manual (Page 177)

Chapter 9: Maintenance - HS
Figure 9-10. Removing an Outer Arm Spring
Removing the first spring is the most difficult, as the other spring will tend to
restrict movement of the spring.
2. Slip the springs off of the horseshoes. See the following figure.
Figure 9-11. Spring, with End Removed from Horseshoe
The narrowest part of the horseshoe is 90° from the groove in which the spring
end normally rests.
3. Repeat these steps for the remaining spring.
Adept Quattro User's Guide, Rev F
Page 177 of 196