Adept s650HS Quattro - Manual (Page 28)

Chapter 2: Robot Installation - H
Figure 2-1. Shipping Crate (s650H shown)
Figure 2-2. Outer Arms for the Quattro s800 (s800H shown)
The robot base is shipped with the inner arms attached. The outer arms are
shipped separate from the robot base, assembled in pairs. The platform is
shipped fully assembled, but separate from the robot base and outer arms.
Under the robot base, the ancillary items will be attached to the crate bottom.
2. Lift off the cardboard sides.
3. Remove the lag bolts holding the robot base to the crate sides.
Adept Quattro User's Guide, Rev F
Page 28 of 196