Adept s650HS Quattro - Manual (Page 189)

Chapter 10: Robot Cleaning/ Environmental Concerns- H
NOTE: All cables must be screwed into the AIB/eAIB.
10. Attach the cable entry top cover, with Roxtec frame and modules, to the AIB/eAIB cable
seal housing.
l Slide the top cover over the seal housing lip, as shown in the following figure.
l Ensure that the gasket between the top cover and the cable seal housing is seated,
and that all cables are contained within the top cover.
l Lower the top cover onto the seal housing, and secure with one screw.
Figure 10-10. Installing Cable Entry Top Cover Assembly
Adept Quattro User's Guide, Rev F
Page 189 of 196