Adept s650HS Quattro - Manual (Page 74)

Chapter 4: System Installation
4.6 Description of Connectors on Robot Interface Panel
Figure 4-2. Robot Interface Panel, AIB and eAIB
The following connections are the same for both the AIB and the eAIB:
24 VDC—for connecting user-supplied 24 VDC power to the robot. The mating connector is
provided.
Ground Point—for connecting cable shield from user-supplied 24 VDC cable.
200-240 VAC—for connecting 200-240 VAC, single-phase, input power to the robot. The
mating connector is provided.
Adept Quattro User's Guide, Rev F
Page 74 of 196