10m-10gbe mac with ieee 1588v2 testbench files, 10m-10gbe mac with ieee 1588v2 testbench files –6 – Altera 10-Gbps Ethernet MAC MegaCore Function User Manual
Page 65

6–6
Chapter 6: 10M-10GbE MAC with IEEE 1588v2 Design Example
10M-10GbE with IEEE 1588v2 Testbench
10-Gbps Ethernet MAC MegaCore Function User Guide
February 2014
Altera Corporation
6.5.3. 10M-10GbE MAC with IEEE 1588v2 Testbench Files
The <ip library>/ethernet/altera_eth_10g_design_example/testbench directory
contains the testbench files.
Table 6–3
describes the files that implement the 10M-10GbE MAC with IEEE 1588v2
testbench.
Table 6–3. 10M-10GbE MAC with IEEE 1588v2 Testbench Files
File Name
Description
avalon_bfm_wrapper.sv
A wrapper for the Avalon BFMs that the avalon_driver.sv file
uses.
avalon_driver.sv
A SystemVerilog HDL driver that utilizes the BFMs to exercise
the transmit and receive path, and access the Avalon-MM
interface.
avalon_if_params_pkg.sv
A SystemVerilog HDL testbench that contains parameters to
configure the BFMs. Because the configuration is specific to
the DUT, you must not change the contents of this file.
avalon_st_eth_packet_monitor.sv
A SystemVerilog HDL testbench that monitors the Avalon-ST
transmit and receive interfaces.
default_test_params_pkg.sv
A SystemVerilog HDL package that contains the default
parameter settings of the testbench.
eth_mac_frame.sv
A SystemVerilog HDL class that defines the Ethernet frames.
The avalon_driver.sv file uses this class.
eth_register_map_params_pkg.sv
A SystemVerilog HDL package that maps addresses to the
Avalon-MM control registers.
ptp_timestamp.sv
A SystemVerilog HDL class that defines the timestamp in the
testbench.
tb_run.tcl
A Tcl script that starts a simulation session in the ModelSim
simulation software.
tb_testcase.sv
A SystemVerilog HDL testbench file that controls the flow of
the testbench.
tb_top.sv
The top-level testbench file. This file includes the customized
10M-10GbE MAC, which is the device under test (DUT), a
client packet generator, and a client packet monitor along
with other logic blocks.
wave.do
A signal tracing macro script for use with the ModelSim
simulation software to display testbench signals.