Kipp&Zonen COMBILOG Data Logger - Manual (Page 79)

7.5 External Data Storage with SD Card
The data will be stored in a file on the SD Card. The name of
the file depends of store mode. Three different modes of file
storage:
Day file
Every day a new file will be created with the name consists of
day, month and year.
Example: 02062008.csv
This file contained data from 2. June 2008
Month file
Every month a new file will be created with the name consists
of month and year.
Example: 062008.csv
This file contained data from June 2008
Continues file
New data will be append to the file.
The name of the file: cl_log.csv
The file contain also additional information about channel con-
figuration.
If the memory card is filled, no further data will be recorded.
Data recording is performed in ASCII format. A separation
mark (";" or tabulator) and the decimal character ("." or ",") is
selectable by the user.
Note: The data logger can write data to pre-formatted memory
cards only. The data logger supports the FAT 32 file system.
Hardware Manual COMBILOG 1022
79