Kipp&Zonen COMBILOG Data Logger - Manual (Page 128)

binary 1, 2 or 4 byte
ReqDataUnit: [ [ [ .... [ ] ] ] ]
ResDataUnit: . . . . . . . . . . . . . . . . < Kn >
If a bit is set in the byte, the corresponding sensor
channel is tared or reset respectively. The values following the
-byte are allocated to the writeable channels of the
data logger, according to the order of their appearance. Write-
able channels are setpoint channels and digital output chan-
nels.
Hardware Manual COMBILOG 1022 128