Kipp&Zonen COMBILOG Data Logger - Manual (Page 76)

Conditional data storage
Measured values are stored in the memory as long as a condi-
tion defined by the configuration program is valid (e.g. a
threshold is exceeded).
Conditional data storage with zoom function
In this mode two time bases for data recording are available.
The selection between these time bases depends on a condi-
tion selected by the configuration program.
7.3 Storage Medium
The COMBILOG 1022 has 3 storage modes.
●
Flash: storage only in internal Flash
●
SD-Card: storage only on external SD-Card
●
Flash & SD-Card: data will be stored on both mediums
NOTE: The storage medium can be configured on the website.
Have a look at section webserver.
Hardware Manual COMBILOG 1022 76