Kipp&Zonen COMBILOG Data Logger - Manual (Page 34)

4.7 Signal Processing
Arithmetical averaging is carried out using several measuring
values. The averaging interval, which is the same for all chan-
nels, can be set to one of the values 0.5, 1, 2, 3, 4, 5, 10, 15,
20, 30 seconds or 1, 2, 3, 4, 5, 10, 15, 20, 30 minutes or 1, 2,
3, 4, 6, 8, 12 hours respectively. The calculated values are fi-
nally stored in the memory.
With the configuration software the kind of averaging is select-
able: Normal averaging or averaging of wind direction (con-
sideres the discontinuity at NORTH). For counter variables not
the average, but the number of pulses is calculated.
A change of the average interval can be initiated by certain pro-
gram conditions, thus featuring temporary higher time resolu-
tion of measured signals.
Hardware Manual COMBILOG 1022 34