Kipp&Zonen COMBILOG Data Logger - Manual (Page 145)

12 WEBSERVER
12.1 General
The Web server can be used to configure and view settings of
the COMBILOG 1022. To access the COMBILOG 1022 web
server type the IP into the location bar of your browser. The
status pages of COMBILOG 1022 can be viewed without enter-
ing a password. However, if you want to view or change set-
tings of the data logger you have to login with your password.
Now you can navigate through the settings pages using the
navigation links on the left site.
12.2 System Info
On this site you have a quick overview about CPU frequency,
firmware version, serial number, system temperature and net-
work settings.
12.3 System Log
The system log saves important internal events with continuous
number and date / time. E.g. every system boot is recorded.
If not all events fit into one screen the first shown event can be
selected by typing the number in “Start Log” and reloading the
page with the “Show”.button.
The system log can be downloaded to the PC using the “Down-
load” button.
With the link “clear systemlog” all events will be deleted.
12.4 Data View
On this page all configured channels are displayed. The chan-
nels are displayed in groups of 8 channels per page. The group
can be selected using the links 1 – 8, 9 – 16, 17 – 24 and 25 –
32 at the top of the page.
Hardware Manual COMBILOG 1022
145