Kipp&Zonen COMBILOG Data Logger - Manual (Page 15)

2.3 Features
Function:
 Measurement inputs for all common types of sensors for I,
U and R.
 Several different sensors can be connected simultan-
eously
 Measured values monitored by programmable thresholds
 Detection of sensor errors
 Detection of communication errors
 Programmable error handling
 Calculation of average values, minima, maxima, standard
deviation and other arithmetic functions
 7 MByte Flash internal data storage, extendible with ex-
ternal SD card
Inputs and outputs:
 8 analogue inputs (for 2-, 3- and 4-wire connection)
 6 digital inputs/outputs (I/O ports), configurable
Power supply:
 Power supply: +10 ... +30 VDC
 All connections protected against excess voltage, excess
current and reverse polarity
 Battery operation is possible due to low power consump-
tion
Display and operation:
 LED-status indication for digital inputs/outputs
 LED-status indication for malfunction and operation (ERR /
RUN)
Hardware Manual COMBILOG 1022
15