Kipp&Zonen COMBILOG Data Logger - Manual (Page 72)

Setting of the date and time
In order to change the date and the time the press/rotary knob
must be pressed when the time
(1) respectively date (2) is dis-
played. For this purpose a cursor will be set on the first charac-
ter of the date respectively time indication. Pressing the knob
again will move the cursor one character to the right. The value
at the place of the cursor can be altered by turning the knob.
Note: The time will be stopped if the press/rotary knob is
pressed in the main menu, date and time display. The time will
continue running if the date or time setting is confirmed by
pressing the knob.
Hardware Manual COMBILOG 1022 72
Configuration
Date / Time
Time change?
Combilog 1022
Date / Time
02.01.2009
00:05:10


Configuration
Date / Time
Date change?
Change+
Change-
Change+
Change-
Configuration
Date / Time
02.01.2009
Configuration
Date / Time
00:05:10




(2)
(1)