Kipp&Zonen COMBILOG Data Logger - Manual (Page 29)

4 SIGNAL PROCESSING
The data logger COMBILOG 1022 has eight analogue inputs
and six digital inputs/outputs. Several different sensor signals
as well as digital inputs and digital output signals can be con-
nected and processed simultaneously.
4.1 Analogue Inputs
The analogue inputs serve to collect sensor signals, or to ac-
quire control values respectively. They are particularly de-
signed to measure voltages, currents and resistances.
There are 8 equal analogue inputs, each input can be con-
figured individually.
Note: Overloads of more than ± 10 VDC will lead to false
measuring results in the according analogue input channel.
Overloads of more than ± 15 VDC will also have influence on
the measuring accuracy of the other input channels!
4.2 Digital Inputs/Outputs
The six digital inputs/outputs of the data logger can be con-
figured - independent of each other - as inputs or as outputs.
The current status (in/out) is signalized by one LED each.
Hardware Manual COMBILOG 1022
29