Kipp&Zonen COMBILOG Data Logger - Manual (Page 102)

11.4 Output Format
The data format can be user defined by means of configuration
software COMBILOG.EXE. The data logger adjusts the data
formats accordingly and makes sure that the data are available
in the selected unit.
For transmission in ASCII-format, the format settings listed in
table 11.2 can be chosen. By transmission in MODBUS-format
the output format (integer or real) is recognised automatically
(table 11.4). The Coding of a real value in MODBUS-format is
as follows:
Coding of the real value: x = s ee...ee mmm.....mmm
Value: ( ) , − ⋅ ⋅ − 1 2 1 127 S e m # : <1> <- 8 -> <----- 23 ---->
Value (0 < e < 255): (-1) S *2 e-127 *1,m
Value (e=0): (-1) S *2 e-126 *0,m
format settings range of values
unit dependent on sensor
field length 1 . . . . . . . . . . . . . . . . . . 8
decimals 0 . . . field length-1 (max. 6)
Table 11.2 Format settings for transmission in ASCII-format
format settings length range of values
b o o l 1 Byte (dez 0: FALSE) und (dez 255: TRUE)
integer 2 Byte (dez - 32768) ≤ i ≤  (dez +32767)
r e a l 4 Byte (dez - 2
129
) ≤ x ≤ (dez + 2
129
)
SET 8 1 Byte
(dez 0) ≤ i ≤ (dez 255 )
Table 11.3 Format settings for transmission in PROFIBUS-format
Hardware Manual COMBILOG 1022 102