Kipp&Zonen COMBILOG Data Logger - Manual (Page 17)

Communication:
 Integrated RS 485, RS 232, USB and Ethernet communic-
ation interface
 Autonomous function independent of subsequent systems
 Definition of the transmission protocol (ASCII and
PROFIBUS or MODBUS)
 Definition of the telegram format (baudrate and parity)
 Definition of the output format
(field length / decimals / unit)
 Simple instruction set
Shell:
 Compact structural shape
 Attractive design
 Fast mounting
 Snap-on mounting on DIN rail 35 mm / 1.4 inch
 Protection IP20
 Plug-in screwed terminals
 Module jack, ground connection
2.4 Configuration Software
The COMBILOG 1022 is delivered with a configuration soft-
ware for MS WINDOWS 98/ME/NT/2000/XP. This software al-
lows the individual configuration of the data logger.
Measuring channels are defined as variables in a variable
table.
Predefined sensors can be selected from the integrated data-
base. The linearisation of the sensor signals will be performed
automatically. Additional sensors can be defined.
Additional parameters like scan rate, averaging interval, data
recording, error handling, automatic message generation, mas-
ter function etc. are configurable. A password enables protec-
tion of the configuration and the stored data. Instantaneous
measured values can be watched directly.
Hardware Manual COMBILOG 1022
17